Body Temperature Monitoring System

Body Temperature Monitoring System
Body Temperature Monitoring System

Description

The body temperature detection camera is integrated with thermal imaging and temperature measurement in combination with visible imaging allowing intelligent image analysis.
The body temperature detection camera is a high precision system with an accuracy of less than or equal to 0.3°C.
The camera allows real-time temperature measurement, with immediate response times and multiple user detection in dynamic environments ensuring no omissions.


FEATURES

Body Temperature Monitoring System

Body Temperature Monitoring System

An AI based contactless temperature monitoring system which allows early diagnosis/ discovery of fevers. Thermal Camera

The body temperature detection camera is integrated with thermal imaging and temperature measurement in combination with visible imaging allowing intelligent image analysis.

The body temperature detection camera is a high precision system with an accuracy of less than or equal to 0.3°C.

Black body Radiator

A black body radiator is a standard temperature source used for temperature calibration.

It is specially used for calibrating infrared thermometers and temperature cameras of various sizes. Contemporary temperature measurement is greatly affected by environmental factors, a black body avoids this by providing greater accuracy and excellent temperature uniformity.

 

  • Specially used for calibrating infrared thermometers and temperature cameras of various sizes.
  • Excellent temperature uniformity on the calibration plane.
  • By using intelligent temperature controller to achieve high accuracy.
  • Fast temperature rise and fall.
Black body Radiator
State of the Art AI + Thermal Technology

State of the Art AI + Thermal Technology

  • Easy to use UI
  • System Management
  • Device Management
  • Attendance Management
  • Alarm
  • Warning Management
  • Report Management
  • Health Records Management
  • Personnel Archives Management
  • Online Real-Time Monitoring
  • Mobile App
  • Cascaded Unified Management

Application Areas

 

Typical application

  • Accurate face tracking Present results in real time
  • Bi-spectrum, dual channel real-time monitoring
  • Multi-objective fast non-contact temperature measurement
  • Temperature accuracy ≤0.3˚C
Application Areas

TECH SPECS

Infrared Camera
Infrared sensor Uncooled infrared focal plane sensor
Material Vanadium oxide
Infrared Resolution 400 x 300
Video resolution 704 x 576
Pixel pitch 17 μm
Wave length 8 to 14 μm
Thermal sensitivity NETD 40mK
Frame rate output 50/60Hz
Focal Length 8mm
Focus mode Manual
Field angle 460 x 350
F-Number 1.0
Color mode Black / White / Rainbow / Iron Red / Customized(up to 17 color mode)
Visible Light Camera
Resolution 1920(H) x 1080(V)
Wide dynamic range > 120dB
Signal to noise ratio > 55dB
Aperture mode Auto/Manual
Minimum illumination Color: 0.1Lux, (F1.2,AGC ON); Black/white: 0.01Lux (F1.2, AGC OFF)
Day-night mode With moving filter, automatic day and night switch
Digital noise reduction 3D/2D
Focal Length 2.8mm - 12mm
Image settings Sharpness, saturation, brightness, gain, shutter adjustable
Temperature Measurement
Function Human body temperature monitoring
Alarm Over temperature alarm, temperature difference alarm
Accuracy ≤ 0.3˚C (emissivity, distance, ambient temperature settings)
Multi-target detection Support temperature measurement of 16 targets at the same time
Response time real time
Operation temperature -20°C to + 60°C
Temperature display mode If measurement > 5˚C, display absolute temperature value
Temperature measurement range -20°C to + 60°C
Encoding Characteristics
Video compression standard H.265/H.264//MJPEG
Audio compression standard G.711:8kbps | RAW_PCM:16kbps
Resolution / frame rate 1080P/30fps(visiblelight),D1/30fps (thermal)
Mode PAL/NTSC
Multi-stream Support
Bit rate control CBR/VBR
Network
Network protocol IPv4, RTSP/RTP/RTCP, TCP/UDP, HTTPS, DHC, PDNS, DDNS, PPPoE, SMTP
Number of concurrent 10 channels
User rights Divided into two levels: administrators and ordinary users, administrators can assign different permissions to ordinary users
Support SDK development Linux C /windows C&C++ SDK
Front-end access protocol ONVIF/T28181 (Customized)
Function
Face detection Automatically detect and capture faces in images.
Smart alarm Motion detection alarm, I/O alarm, disk alarm, intelligent analysis alarm, temperature measurement warning
Smart analysis Area invasion, cordon, dual cordon, items left, items removed
Time-phased configuration Support
Privacy masking 5 areas, area size can be set
Character display Temperature, time, date, channel number, channel name and customized text
Interface
Network Interface RJ-45, 10 / 100Base-T
Audio port 1 audio input, 1 audio output, support two-way voice
Alarm interface 2 alarm input, 2 alarm output
Analog video output interface BNC, 75 ohm
PTZ control interface RS485
SD card interface Micro SD card / HCSD card, support up to 128GB
Physical
Power supply DC12V/POE
Power consumption ≤10W(heating not included)
Operation temperature -20°C to + 60°C
Operation environment Indoor
Operation humidity 90% (RH)MAX
Installation method Wall-mount
Sunshade Cartoon
Weight (without stand) 2.12Kg
Protection level IP66
Size (without bracket) 212 x 182 x 136mm (L x W x H)
 

Black Body Radiator

Black-body Radiator
Temperature range 35°C ~ 46°C
Effective emissivity 0.97
Temperature resolution 0.1°C
Radiation surface 78 x 78 mm
Temperature accuracy ±0.15°C
Temperature uniformity ±0.2°C
Power supply 220V 50HZ
Outline dimension 240 x 110 x 150 mm
Weight 1.5 kg